Sunday, 16 October 2011

so many 'little' things to do

I've started to lose track of the order of things.  I seem to have so many loose ends on the go at the moment.
I've been trying to get a few evenings of garage time in to try and make progress with this engine.  I'd like to see if I can get it to run (I think that would give me a good boost to working on the frame and running mechanics)
There seems to have been lots of little time consuming (but not particularly interesting) jobs to be done.  For example;

cleaning the carb air-filter
- fitting the wire rope to the pull start assembly.  The manuals show a special tool for holding the recoil spring while fitting the rope.  I'm not so sure its essential - I managed it ok.

and,
- repairing the perished carburetor rubber air-in pipe (which interestingly draws the fresh air in via the engine case - presumably to warn the air in advance)  I used a gel super-glue in all the cracks - it seems to hold

Wednesday, 12 October 2011

New starter sprocket

The starter engage-sprocket was heavily damaged on the engine that I bought.  It was severely knocked out of line and had badly chipped teeth (someone suggested it looked like an idiot might have tried to free a seized cylinder by whacking it with a hammer and cold-chisel (another reason I was keen to get the crank-shaft balanced)
And so I was committed to repairing or remaking a new sprocket.

For some reason the sprocket on the flywheel was in two parts (were they designed as pressed pieces 'laminated' together?).  I decided to make my new one in one piece - 7.5mm thick steel plate.






A couple of hours sawing and filing and I was ready to go.  However I was a little concerned about the new sprocket wearing faster than it should, so I decided to case harden it.


There are plenty of tutorials on case hardening on the web ( here is a nice simple explanation of how it works) However I chose this one because I had some charcoal.  It was all a bit school-boy experimentation with oxy-acetylene and steam and stuff, but I enjoyed the process.  Whatever the outcome of the metallurgy exercise, the best way to ensure it doesnt get too much wear is clearly to build the bike up to be an easy starter.... but thats a whole different problem

The original sprockets were riveted in place.  I chose to use M4 stainless steel button head socket screws, with a good dob of lock-tight to ensure they don't come out accidently

Tuesday, 11 October 2011

Nuts and Bolts

I started writing this blog to keep my dad up to date with my Manurhin project.  As time has gone on, I've found a small group of people who appear to enjoy reading about the trials and tribulations of trying to bring this sorry machine back to life.
Some of these people are restoring their own Manurhin scooters and for them, I like to make reference to the documents I've used, the problems I've solved and the suppliers I've found.

Recently I had need to buy some special screws, and really struggled to find an engineering nuts & bolts stockist with a trade counter.  Where have these centers of engineering communities gone?  Where are the knowledgeable old gentlemen in their brown cow-gowns who could find just the right bolt for any problem you might put on their counter?
After a little searching, I managed to find 2 such businesses who when I phoned said no, they wouldn't mind if I arrived asking for 3 bolts.  One incidentally was run by a lady..... from her house! - There's the modern engineering world for you!

The other company was run by a single chap from a tatty old industrial unit hidden among several huge car-breaking yards.  As he was searching for the parts I wanted, we chatted about his business and the way it was changing; going one of two ways.  Nuts & bolt suppliers were either bagging bolts and selling them for pennies on eBay, or they were servicing the specials market (He held up an impressive £40 nut, the size of a grapefruit for the MoD).  Then he asked me what my 3 bolts were for and I told him about the Manurhin and how I liked to write on my blog about the interesting and helpful people I have met while solving the many problems I encounter.
"Let me stop you there" he said
"Don't tell anyone about my place"
I thought he might be concerned about his MoD customer.
"I don't want any more people turning up here asking for 3 bolts here and 2 nuts there.  Its just not worth my while."
I paid him my 2 quid and left.

Ignition coils

Why cant I find any information on which variant of Manurhin had an ignition coil, and which didn't?

Close inspection of a French language 'Guide-Reparations' (repair guide) shows an electrical circuit (without the beltomatic integral safety switch) and lists out all sorts of useful information about strokes and bulb wattages and chain links etc etc.... and right down the bottom in the corner, almost as an after-thought, they say;

"Fitted with a Regulator.
A wire (green) connects to the handlebar switch on the left.  The other wire (purple) connects to the regulator contact.
Note; Certain vehicles are equipped with an external ignition coil"

Oh, come on Manurhin! get it together!  you cant simply dismiss the safety switch and HT coil just like that! Where are the details??

Frustrated, it is starting to dawn on me that my engine still isn't complete.  As I began to calm down I went in search of more information



The french for "ignition coil" is "bobine d'allumage" and a quick google search bought up someone selling a Morel primary ignition coil for the Manurhin for 70 euros, but no specific details of an appropriate coil for my scooter.

Although I dont think it helps me immediately with the sourcing of a coil, I thought this Manurhin specific conversation about ignition systems might be a useful read in the near future.  Its a great example of a small bunch of enthusiasts working together to solve a technical problem.  I was especially delighted to read toward the end of the discussion an expression that only a French scooter rider would have the balls and style to say;
"Une fois de plus la ruse et l'intelligence ont triomphĂ© de la force et de la bĂȘtise!!!"

Monday, 10 October 2011

Repairing the exhaust manifold

The more I work on this scooter, the more I think I must be mad.  The whole thing is in such a state, its hardly worth the effort.  Its certainly not worth the financial investment - I have already spent £640 and I am nowhere near getting this thing running, let alone road legal.

Every bit of this bike appears to be either missing or damaged (I really would love to know the history of it all)
Take the engine for example; Although the eBay advert said "Looks like its all there" My engine was missing a carburetor, a pull-starter assembly, an air-duct and a beltomatic Integral safety switch [and remember, this is just the engine - elsewhere, there is no electrics, electrical switches, lights, or brake cables.  In addition I am also missing all of the pleasantries like badges, footrests and useable seats - the whole thing is in a very sorry state]

However, being the 'glass-half-full' (or should that be 'plain stupid'?) sort of chap that I am, I've been pressing on and collecting the missing bits here and there, and kidding myself that I could actually resuscitate this poor old scooter.

But thats enough about the 'Missing' parts, what about the 'Damaged' parts?
The cylinder barrel is just one example.  The exhaust manifold has had its bolt hole smashed off.  In the early days of this project I was of the mind to get it into a specialist welder to build up the iron casting and machine back to shape again, but as costs have started to escalate, I decided to look for a solution that I could do myself.

Its not elegant, but I think its adequate and man enough to do the job of holding the exhaust tight to the engine.  A simple threaded plate held in place by a strap around the manifold.
And its a darn sight cheaper solution than buying a new barrel - There is someone currently selling a barrel/head/piston set on German eBay for £128

Beltomatic belts

The drive belt on the scooter as I received it was rock-hard with age and was certainly in need of changing.  I couldn't find any reference numbers on my belt but fortunately there seemed to be lots of online references to Manurhin drive belts (though the more I looked, the more I noticed that reference numbers do vary everso slightly)
There also seemed to be talk about how difficult it was to find these replacement belts, though I have seen one come up now and then on eBay and Leboncoin.fr

I decided that the specification number I would work to was 22x8x575Li

I needed to get some new oil seals for my crank bearings, and so while asking my local bearing stockist (IBS Bearings Ltd 0121 558 4141) about those, I also took the opportunity to ask them about drive belts - They immediately recognised the spec and quoted me £37.50
I was rather pleased with myself that I should be able to find a belt as easily as that.  However it wasn't until later that day that a fellow Manurhin owner told me that he had just been quoted £12.50 for exactly the same thing! - well, actually its not exactly the same - 22x8x565 - but does this make a difference??
Only time will tell

Wednesday, 5 October 2011

Finding the right electrical schematics

You've got to have your wits about you in this game.  There is a lot of documentation about the Manurhin (for which I am very grateful) but I cant afford to make assumptions that I might have read it all carefully.

As much as I might try, I still haven't got my head completely round all the variants of DKW Hobby and Manurhin Scooter models and variants.  I get the sense that it was all a bit of a free-for-all at the Manurhin Scooter factory with everybody trying a little modification here and a redesign there, and in doing so the technical authors must have had a hell of a job trying to keep up with creating appropriate handbooks.

One example of a variant is the HT coil.  Some scooters have them, some don't.  Mine doesn't, but does that mean my scooter has a particular model number?

Wiring schematic for bike with mechanical 'clutch'
Another example - and the one thats been bugging me is the Beltomatic "electric safety device" clutch control.  Its ingenious no doubt, but there doesn't seem to be any rhyme nor reason as to what bikes had this style of clutch while others had the manually operated lever clutch device.
Note; I may have my facts all of a muddle here - I hold my hand up to that - but I will investigate further and try to create a time line of how and when models and variants came about.  However, just as an example of how messy all the terms are, I read the following in one brochure;

"Manurhin - The only scooter in The World with completely automatic transmission (Uher Beltomatic system) known as the "Variator"

My own scooter has the 'electric safety device' style of 'clutch' - which some brochures refer to as "Beltomatic Integral" - as introduced at the 1957-58 Motor show.
Although the original switch part was snapped off my engine when I bought it - I have since managed to buy a replacement, and as I get closer to wanting to start my engine I began to wonder about how this electrical switch is wired into the running circuit of the bike.... and this is where my assumptions have made a bit of a fool of me.

Wiring schematic for bike with 'electrical safety' clutch
I had been reading the Manurhin Scooter owners manual with great interest, but frustratingly couldn't find any reference to the 'electric safety device'.  The manual only talks about the mechanical lever type.
It never occurred to me that Manurhin in their wisdom might have produce exactly the same Manurhin Scooter owners manual BUT with just a couple of pages differing to cover this clutch difference..... there's not even a little reference number or identification on the alternative booklet to help a dealer know which manual is which.  Its a modern-day data-management nightmare!

It was only after plenty of scouring through the many different copies of manuals that I have (gratefully received from various other Manurhin owners) that I suddenly noticed - with great delight and relief - the differences in publications. [I hope I have made this clear now in the reproducing of the two different owner manuals on the Manurhin Scooter Interest Group website]

So I now have a wiring schematic for how the 'electrical safety switch' clutch control is wired in.  And it looks to me to be a simple case of grounding the LT to intermittently stall the engine and prevent it from revving too hard and thus engaging the belt drive.